• Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

  • Aerosol de aceite de filtro de espuma Torco

    Seleccione su paquete

    Torco FFO Foam Filter Oil Spray está formulado con aceites base especiales y aditivos adherentes para evitar que la humedad y los elementos abrasivos pasen a través de los elementos del filtro de espuma y entren en el motor. FFO es fácil de aplicar y no se seca, gotea ni corre. FFO no pegará ni obstruirá los conductos de espuma.


    características y beneficios

    - Fórmula de mezcla sintética
    - Evita que la humedad y los elementos nocivos pasen a través del filtro
    - Maximiza el flujo de aire para la inyección y el rendimiento
    - Fácil de aplicar y fácil de limpiar

    Technical Data


    Torco FFO Foam Filter Oil Spray is formulated with special base oils and tackifier additives to prevent moisture and abrasive elements from passing through foam filter elements and entering the engine. FFO is easy to apply and will not dry out, drip, or run. FFO will not gum up or clog foam passages.

    >Synthetic blend formula
    >Prevents moisture and harmful elements from passing through the filter
    >Maximizes airflow for consist jetting and performance
    >Easy to apply and easy to clean up

    Recommended for use on all foam filter elements found on a motorcycle, scooter, ATV, and many other 2-cycle and 4-cycle engine applications.

    Application: Shake well before use. Hold FFO 6-8 inches away from the filter surface and spray an even
    coat outside and inside the filter. Massage the filter to work in the product thoroughly. Do not ring out the
    filter, as damage may occur to the foam. To provide a good seal, apply a thin layer of Torco Multi- Purpose Waterproof Grease to the filter's sealing surface. Use latex or rubber gloves when applying filter oil.
    Cleaning: Thoroughly wash the used filter with a light cleaning solvent or a combination of detergent and
    warm water until all dirt particles are removed from the foam. Rinse with clean water and squeeze out excess. Do not ring out the filter, as damage may occur to the foam. Once the filter is completely dry, apply FFO as directed above.

    >>Package Sizes / P/N
    Description FFO
    13.0 Ounces T850001RE
    12/13.0-Ounce Case T850001R

    Featured in